HDL 200 high pressure fire-extinguishing device
| Technical characteristics | |
|---|---|
Dimensions |
760 x 670 x 840 mm |
Weight |
99 kg (with tank) |
Type of power engine |
4-stroke petrol engine, 1 cyl. 9.6 kW |
Type of starting |
recoil rope starter |
High pressure plunger pump |
3 cyl. 22 l/min |
Maximum fire-fighting pressure |
200 bar |
High pressure fire-extinguishing hose |
60 m (300 bar) |
Water tank |
100 l |
Suction of foam agent |
serially |
Spray pistol |
DUPLEX fire-extinguishing attachment |
Advantages in an overview
- short time of setting-up in case of fire
- optimum use of the cooling effect of water
- quench effect by vaporization of water
- extremely short time of fire-extinguishing
- little recoil
- minimum water consumption of maximum 22 l/min
- avoiding of damage caused by fire-extinguishing water and prolongation
- addition of foam agents only when needed
- small built-in measurements in vehicle
Downloads
Oertzen HDL catalogue
Visit our OERTZEN HDL catalogue with a wide choice of HDL-equipment.
Smart accessories
And if there is no fire this doesn’t mean that your HDL has to be out of action. For with the original OERTZEN accessories you can even cope with quite a different challenge.

Sludge pump

Ölblitz - Removal of oiltracks (HDL 250)

