HDL 250 high pressure fire-extinguishing device
 |
High pressure fire-extinguishing device HDL 250, instantaneous fire-fighting without set-up times, built-in unit without water tank (withdrawal of water required from tank of vehicle), fire-fighting pressure 250 bar, capacity of high pressure pump 23 l/min, thermovalve, driven by petrol engine 13.2 kW, fire-extinguishing hose 60 m, DUPLEX fire-extinguishing attachment for spray stream and low expansion foam Order-number: 10.000.997 |
| Technical characteristics | |
|---|---|
Dimensions |
980 x 560 x 560 mm |
Weight |
138 kg (without tank) |
Type of power engine |
4-stroke petrol engine, 2 cyl. 13.2 kW |
Type of starting |
electric / recoil rope starter |
High pressure plunger pump |
3 cyl. 23 l/min |
Maximum fire-fighting pressure |
250 bar |
High pressure fire-extinguishing hose |
60 m (500 bar) |
Water tank |
- |
Suction of foam agent |
serially |
Spray pistol |
DUPLEX fire-extinguishing attachment |
Advantages in an overview
- short time of setting-up in case of fire
- optimum use of the cooling effect of water
- quench effect by vaporization of water
- extremely short time of fire-extinguishing
- little recoil
- minimum water consumption of maximum 23 l/min
- avoiding of damage caused by fire-extinguishing water and prolongation
- addition of foam agents only when needed
- small built-in measurements in vehicle
Downloads
Oertzen HDL catalogue
Visit our OERTZEN HDL catalogue with a wide choice of HDL-equipment.
Smart accessories
And if there is no fire this doesn’t mean that your HDL has to be out of action. For with the original OERTZEN accessories you can even cope with quite a different challenge.
Sludge pump
Ölblitz - Removal of oiltracks (HDL 250)